Smoke alarms are a must have for every household. They are designed to detect smoke and fire and will sound an alarm if there is a fire. However, they also need regular maintenance to keep them working at their best. Here is how to maintain your smoke alarms:
Check and replace batteries regularly - a few months after you first install the smoke alarms, change both batteries at the same time. Also, remove any dead batteries from the unit so it won't continue to work with them installed.
Clean carbon monoxide detector - some people don't realize that if you leave a carbon monoxide detector uncleaned, it will accumulate dust and dirt over time. This can cause an increase in false alarms as well as affect the unit's sensitivity level. To clean your carbon monoxide detector, use warm water and mild soap or detergent. Then dry completely before replacing the battery pack in your unit.
Test smoke detectors - test smoke detectors once per year by pushing the test button on each one individually for five seconds each day until all units have been tested then put them away for a month or two so they can properly reset their internal clocks
Smoke alarms are designed to detect smoke, carbon monoxide and other gases. They do this by measuring the amount of current flowing through them. If you have a battery backup, your system will also sound an alarm when it senses that power has been interrupted.
For most smoke alarms, the amount of current flowing through them is determined by the battery's voltage. The higher the voltage, the more current will flow through them. However, if your batteries are low on power, they might not be able to produce enough current for your smoke alarms to work properly.
This is where your smoke alarms can fail you when they need to perform their duties most effectively: in a high-stress situation where they're stressed out by too much current or too little power.
Without a working smoke detector, no one in your home would be able to escape a fire caused by a fire starter such as a cigarette or match. And yet, many homeowners don't take their smoke alarm batteries seriously enough.
The reason: They don't know how much their smoke detectors cost or what they can do for them. But there are several things you can do to make sure your smoke alarms work properly — even when they're not on a schedule.
Smoke alarms are a key component of any home fire safety program. Without them, you're not going to be able to escape the flames or smoke that can quickly fill your home.
Smoke detectors are designed to detect smoke and heat from fires. They will sound an alarm if they detect dangerous levels of smoke or heat. These alarms will continue to sound until they are deactivated by pressing a button on the front of the unit.
In order for this system to work properly, you have to have good batteries in your smoke detectors. If your batteries aren't working properly or need replacing, it's time to change them out!
Comments
Post a Comment